Specifications
| Item Number |
DP-1000E |
| Swing |
15-1/2″ |
| Diameter of Column |
3-1/8″ |
| Spindle Travel |
3″ |
| Base Size |
23″ x 16″ |
| T-Slot Width |
1/2″ |
| Table Size |
12-1/2″ x 12-1/2″ |
| Speeds |
5 |
| Quill Diameter |
2″ |
| Spindle Nose to Table |
5-1/2″ Min. To 35-1/2″ Max. |
| Spindle Nose to Base |
47-1/2″ |
| Spindle Taper |
MT2 |
| Table Angle Adj |
360° |
| Main Motor |
1/2 hp |
| Rpm |
250, 700, 1150, 1900, & 2900 |
| Drill Capacity Steel |
1″ |
| Power |
110 Volt |
| Shipping Weight |
290lbs |
| Special Notes |
B-16 1-16mm Keyless Chuck, MT2 to B16 Arbor, Drift Key |
| Certification |
CE |
| Shipping Dimensions (Inches) |
60x44x21 |
* specifications subject to change without notice.
This economical belt driven drill press runs smoothly even at full capacity – the DP-1000E is a 15-1/2″ drill press with an MT2 Taper that lets you run tooling at the proper speed to fit your application with its 5 speed pulley configuration which helps extend tooling life.
- .5 hp motor requires 110 volt power and will work at any shop or site.
- Belt driven head drills a maximum capacity of 1” steel.
- 5 speeds in the range from 250 to 2900 rpm to suit your application.
- 3-1/8″ steel column eliminates flexing even when drilling at full capacity.
- Rigid cast iron base and table add strength to the drill’s structure.
- Includes a safety shield around the drill head to protect you.
